Our version 2 chassis mounted splitter is a balance between track and show cars looking for something more durable than a bumper mounted lip, and provides actual downforce. We have designed a system that allows for blade AOA adjustment with the splitter on the car.The bumper can be removed or installed with the splitter installed. The endplates are optional, if you prefer a cleaner look.

For a baseline reference – at 0 AOA the blade itself produced 50lbs of downforce at 100mph. On track testing on similar platforms has shown that increasing the AOA and/or adding additional Aero elements (end plates, splitter diffusers (tunnels), fender spats, canards, hood vents etc) improve the efficiency significantly.

We also offer this bracket kit, without a blade here, if you would like to make your own splitter blade.

INSTALL NOTES: Please read these product details thoroughly for fitment and installation requirements. The install process is outlined here.

• Install requires trimming the bottom edge of the bumper cover. This is an unpainted portion of the bumper, and not visible while the car is on the ground if you remove the splitter.
• Install requires a riv-nut tool (not included).
• Install requires a 13.5 mm drill bit (included).
• If you are on air ride, do not air-out onto these brackets, they are not designed to support the weight of an entire vehicle.

Each Order includes:

• Bracket set – top, bottom, and center withpre-installed hex shank riv-nuts
• Strake set
• 4 adjustable rods
• Flange head bolts and nylock hardware
• Countersunk hardware to attach a blade to brackets (3/8″ or thinner blade)
• Blade – 9mm thick – black textured UV resistant plastic with a radiused edge and pre-drilled countersunk holes

Add on options (not included):

• Powder coating
• Endplates

Weights –

Full assembly- 28 lbs

Ships in a 24″x72″x5″ box – 40lbs packed

All sales are final, no returns or refunds. This item does not qualify for free shipping. This product ships in 5-10 business days. Made in USA.

Whats the difference between versions?

• V1 – Brackets – DIY kit to build your own blade

• V2 – Blade with integrated air dam – Shaped for street or autocross use

Disclaimer – Off road use only, not intended to be used on public roads. This product is not DOT approved. This product may alter the handling of the vehicle. The buyer is responsible for all modificationsmade toyour car. CJM Industries llc assumes no responsibility or liability as a result from altering your car with our products.This productmay not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to conform to all applicable laws and regulations for road use, especially pertaining to safety.